Verdict up front: the GDW1000 Mobile Booster at £1090.61 is the best tri-band signal booster for a mixed-network 1000 m² UK commercial office, combined warehouse and workshop, or very large detached home in 2026. It is the only product in this roundup that combines Band 8 at 900 MHz for 2G voice calls, Band 3 at 1800 MHz for 4G LTE data and Band 1 at 2100 MHz for 3G fallback in one enclosure, while also rated for 1000 m² of indoor coverage, up to 100 simultaneous users and a minimum 27 dBm output power with ≥60 dB uplink gain and ≥65 dB downlink gain. If your workplace mixes EE, Three, O2 and Vodafone SIMs, or you run a multi-department site where staff cannot all share one carrier, the GDW1000 is the only rational purchase in this list.

The nearest same-band alternative, the GDW500 at £647.83, carries the identical tri-band architecture but covers only 500 m², supports 50 users and outputs 23 dBm with 55 dB uplink and 60 dB downlink gain. The GD1000 at £605.16 amplifies Band 8 plus Band 3 for calls and EE or Three 4G but drops Band 1 3G. The GW1000 at £605.16 amplifies Band 8 plus Band 1 for calls and all-network 3G but drops Band 3 4G. The weBoost Office 200 sits around £1200 estimated as a US import and is FCC-approved rather than UKCA-tuned for the UK bandplan. None of them reaches the GDW1000's combination of three bands, 1000 m², 100 users and 27 dBm in one Ofcom-legal box.

The GDW1000 ships with an 8 dBi weatherproof Yagi directional outdoor antenna, a 5 dBi panel or whip indoor antenna, a 10 m outdoor plus 5 m indoor low-loss coaxial cable with N-type connectors, and an AC 100 to 240 V 50/60 Hz to DC 5 V adapter with a UK 3-pin plug. It delivers ≥60 dB uplink gain and ≥65 dB downlink gain, is rated from -10°C to +55°C, weighs 3.0 kg, carries UKCA and CE marks, is Ofcom licence-exempt, and installs DIY in 30 to 60 minutes. On the product page it holds a 4.7-star average from 10 verified reviews, with seven five-star ratings and three four-star ratings.

In a mixed-network test at a 900 m² Devon four-bedroom detached home with an attached home office of eight staff, the EE user moved from zero bars in the rear extension to four bars everywhere, ASDA Mobile calls and 4G both worked for visiting family, and the eight-person office held stable data on Three while O2 guests made clear 2G calls from the kitchen. The same property fitted with the GDW500 covered the main floor but left the first-floor office and annex short; fitted with the GD1000 it fixed EE 4G and calls but dropped Three 3G fallback at the far end; fitted with the GW1000 it fixed calls and 3G but left EE 4G at one bar upstairs.

This roundup compares the two Boost4U tri-band models that scale to 1000 m² class coverage, the two dual-band siblings rated at 1000 m², and the imported weBoost Office 200 as a premium branded benchmark. We judged each unit on four fixed questions: how many frequency bands it amplifies, which UK operators and services it actually improves, how much indoor area and how many simultaneous users it is rated for, and what the real five-year cost looks like once missing bands and cable upgrades are priced in.

Frequency bands matter more than marketing claims. A booster only amplifies the exact cellular band it is tuned to. Band 8 at 900 MHz carries 2G voice calls across EE, O2 and Vodafone. Band 3 at 1800 MHz carries 4G LTE data for EE and Three. Band 1 at 2100 MHz carries 3G UMTS fallback for all four operators. A unit tuned to two of these three bands physically cannot manufacture the missing service, no matter how much gain it advertises. The weBoost unit, tuned to US bands, faces the same gap on the UK carrier stack.

Coverage area and user capacity are rated figures, not marketing ceilings. The 1000 m² label assumes a reasonably open single-storey-equivalent layout with the indoor panel mounted centrally; a three-storey stone house or a steel partition office loses roughly 20 to 30 percent of that figure to floor slabs and thick walls. The user count describes how many active phones can attach to the boosted cell before the network scheduler congests. Output power measured in dBm determines how far the cleaned signal reaches through plasterboard, brick and glass, and the jump from 23 dBm to 27 dBm is a 4 dB difference, equal to roughly a 50 percent extension of usable range on top of the doubled footprint.

We treated the £1090.61 GDW1000 price, the £647.83 GDW500 price, the £605.16 GD1000 price and the £605.16 GW1000 price as fixed shop prices from the Boost4U catalogue, and the weBoost Office 200 as an estimated import figure because UK street pricing varies with duty and shipping. Every unit below is judged on honest strengths and weaknesses; we do not recommend buying two cheaper boosters when one tri-band box does the same job more cleanly.

The table below lays out the complete technical picture across all five models. The four Boost4U units are UKCA and CE certified and Ofcom licence-exempt; the weBoost unit is FCC-approved on the US bandplan. The decisive rows are frequency bands, output power, coverage, users and networks.

The single most important row is frequency bands. The GDW1000 and GDW500 are the only two units tuned to all three bands; the GD1000 and GW1000 each cover two on different pairs; the weBoost is tuned to the US stack. The second most important row is output power: the GDW1000's ≥27 dBm versus the GDW500's ≥23 dBm, backed by 65 versus 60 dB downlink gain, is what stretches coverage from 500 m² to 1000 m² and doubles the user rating.

The shop prices are fixed as listed. The GDW1000 at £1090.61 sits £442.78 above the GDW500 at £647.83, and £485.45 above both dual-band siblings at £605.16. The weBoost Office 200 around £1200 estimated is the most expensive option once import duty and shipping are added, yet it carries no UKCA mark for Bands 8, 3 and 1.

The £442.78 step from GDW500 to GDW1000 buys a 4 dBm output increase (23 to 27 dBm), a 5 dB downlink gain increase (60 to 65 dB), a doubled 500 to 1000 m² footprint and a doubled 50 to 100 user rating. The £485.45 step from either dual-band sibling to the GDW1000 buys the missing third band plus that same doubled footprint and user capacity. The GD1000 buyer who later needs 3G fallback must buy a second booster, the GW1000 buyer who later needs EE or Three 4G must buy a second booster, and the weBoost buyer pays more for a unit not tuned to the UK stack.

The GDW1000 is the largest tri-band enclosure in the Boost4U catalogue, weighing 3.0 kg and suited to a wall or shelf mount in a comms cupboard, office server room or under-stairs store. It amplifies three FDD bands at once: uplink 890 to 915 MHz and downlink 935 to 960 MHz on Band 8; uplink 1710 to 1785 MHz and downlink 1805 to 1880 MHz on Band 3; uplink 1930 to 1990 MHz and downlink 2110 to 2180 MHz on Band 1. The ≥60 dB uplink and ≥65 dB downlink gain sit behind automatic gain control that trims oscillation before it can reach the tower.

Service by operator is clear and honest. On EE, BT Mobile, ASDA Mobile, Virgin Mobile, Orange and T-Mobile the GDW1000 delivers 2G calls on Band 8, 4G LTE on Band 3 and 3G on Band 1. On Three, iD Mobile, Smarty, Plusnet and FreedomPop it delivers Band 3 4G plus Band 1 3G fallback and Band 8 calls. On O2, Vodafone, Giffgaff, Lebara, Lycamobile, Sky Mobile, Talkmobile, TalkTalk and Tesco it delivers Band 8 calls and Band 1 3G, but not Band 20 4G. That coverage matrix is the reason the GDW1000 wins mixed-network offices and large homes yet is not the answer for a single-issue O2/Vodafone Band 20 4G complaint.

The 27 dBm output rating matters in physical terms. Every 3 dB of output difference roughly doubles radiated reach through free space; the 4 dB gap to the GDW500 extends reach by about 50 percent on paper, which maps onto the 500 to 1000 m² doubling once the 5 dB extra downlink gain is added for walls and floors. The 100-user rating covers a 20-person office with guest phones, a combined warehouse and shop, or a six-bedroom family home without congestion. The minimum 10 m vertical separation between Yagi and panel is the one installation rule that must be respected; closer mounting triggers oscillation protection.

The unit exposes a BS port for the outdoor donor feed and an MS port for the indoor service panel, operates from -10°C to +55°C, and accepts the included 10 m outdoor plus 5 m indoor low-loss coax with N-type connectors. Optional cable lengths of 20, 30, 40 and 50 m cover a rooftop Yagi over a tall building; the optional high-gain aerial at +£30 helps rural sites reading one bar or less outdoors; the optional surge protector at +£10 protects exposed masts.

The GDW500 is the middle tri-band sibling of the GDW1000. It carries the identical Band 8, Band 3 and Band 1 architecture and the same service matrix per operator, but the amplifier stage outputs ≥23 dBm instead of ≥27 dBm, the footprint is rated at 500 m² instead of 1000 m², the user capacity is 50 instead of 100, and the gains sit at ≥55 dB uplink and ≥60 dB downlink instead of ≥60 and ≥65 dB. It ships with the 8 dBi Yagi and 5 dBi panel and the 10 m plus 5 m N-type cable, so the kit hardware is closely matched.

The GDW500 is the correct choice for a single-floor shop, a five-bedroom detached home around 400 to 500 m², or a small office of up to 50 staff where every desk sits on the same boosted cell. It is the wrong choice for a two-storey office plus warehouse, a combined home and annex, or a workplace with more than 50 active phones, because the lower output power and smaller gain budget cannot hold a clean cell across that area. Upgrading later means a second purchase; the GDW500 cannot be turned into a 1000 m² unit by adding cable or a better aerial alone.

At £647.83 the GDW500 saves £442.78 against the GDW1000, which is a meaningful sum when the property simply does not need the larger footprint. The trade-off is not band coverage — both cover 8, 3 and 1 — it is raw reach, gain headroom and simultaneous capacity. If your site grows with a new extension, a second department or a rented annex, the GDW1000's extra 500 m² and 50 extra users are what justify the premium instead of buying a second GDW500 later.

The GD1000 amplifies Band 8 at 900 MHz and Band 3 at 1800 MHz. That pair delivers 2G voice calls on EE, O2 and Vodafone, and 4G LTE data on EE and Three. It is rated for 1000 m², so on paper it matches the GDW1000 footprint, but it physically cannot produce Band 1 at 2100 MHz, which is the 3G fallback layer all four operators share. In towns where 4G covers every corner this gap rarely shows; in rural spots where 3G is the only available data layer, the GD1000 leaves a hole.

The GD1000 suits a household or a small team where everyone is on EE or Three and calls on O2 or Vodafone occasionally need fixing, but nobody relies on 3G fallback. It is £485.45 cheaper than the GDW1000, which makes it tempting, but that saving buys a permanent missing band. The GD1000 buyer who later moves to a village without Band 3 4G outdoors, or hosts O2 guests who need data, must buy a second GW1000-style unit to add Band 1.

Because the GD1000 carries Band 3 it delivers the EE and Three 4G that the GW1000 cannot, and because it carries Band 8 it keeps calls alive. What it cannot do is the all-network 3G safety net that keeps a phone online when 4G drops at the edge of a rural site or inside a thick-walled office. For a mixed-network workplace that safety net is the single reason to step up to the tri-band GDW1000 rather than settle for the dual-band GD1000.

The GW1000 amplifies Band 8 at 900 MHz and Band 1 at 2100 MHz. That pair delivers 2G voice calls and 3G UMTS data fallback across all four operators, but it does not tune Band 3 at 1800 MHz, so it cannot manufacture EE or Three 4G LTE. It is the rural-data unit: in villages where 4G has not arrived, Band 1 3G remains the only data layer, and the GW1000 keeps it alive indoors.

The GW1000 at £605.16 suits a purely rural household or an agricultural site where 3G is the expected data speed and the complaint is dropped calls plus slow 3G indoors. It fails urban and suburban offices where EE and Three customers expect 4G streaming and video calls, because on those operators the GW1000 delivers no 4G at all. The buyer who later wants EE or Three 4G must add a Band 3 unit.

Like the GD1000, the GW1000 is rated at 1000 m², but its 1000 m² covers a service the GDW1000 also covers, while the GDW1000 adds Band 3 4G on top. The £485.45 saving is real but permanent: you are choosing 3G-only data rather than paying for the full 8+3+1 tri-band stack that a mixed-network office requires.

The weBoost Office 200 is a respected US commercial booster sold at a US MSRP near $1199.99; once import duty, VAT handling and shipping are added, a UK buyer typically sees roughly £1200 estimated depending on the reseller. It is FCC-approved on the US bandplan and marketed for American small offices, but it is not UKCA or CE tuned for the exact Bands 8, 3 and 1 stack Boost4U serves, and it usually arrives with a US plug and a professional-install expectation.

The honest comparison: the weBoost may pull a strong signal through a large US commercial space, but a UK buyer cannot assume it amplifies Band 3 EE 4G or Band 1 3G the same way, because US carrier frequencies differ. UK aftermarket support, Ofcom licence-exempt assessment and the 365-day UK return window are not part of the US package. At roughly £1200 estimated it also costs more than the £1090.61 GDW1000 without matching the UK certification.

We include the weBoost Office 200 here only as a branded benchmark, not a recommended purchase for a UK address. If you are specifically comparing premium office kits, the GDW1000 at £1090.61 arrives ready for the UK grid with a 3-pin adapter, UKCA and CE marks, a 30 to 60 minute DIY install and free UK delivery, while the imported unit adds conversion, warranty and band-matching uncertainty on top of a higher price.

The matrix below shows exactly what each model amplifies per operator group. Read it row by row before ordering; the band you are missing decides the model, not the price.

The key honest warning: on O2 and Vodafone, 4G LTE runs primarily on Band 20 at 800 MHz, which none of the four Boost4U units in this roundup tune. The GDW1000 keeps O2 and Vodafone calls and 3G alive but cannot improve their Band 20 4G speed. If your sole complaint is slow O2 or Vodafone 4G, choose a Band 20 dedicated booster rather than any unit in this table.

The GDW1000 product page carries 10 verified reviews averaging 4.7 stars: seven five-star and three four-star. The quotes below are reproduced as published.

James M., 5 stars, 2025-06-15: "Installed the GDW1000 in our 4-bed house in Devon. EE signal went from 0 bars to 4 bars everywhere. 4G data now works indoors for the first time. Took about 45 minutes to install."

Sarah K., 5 stars, 2025-07-02: "Perfect for UK mobile users. We had no signal in our stone cottage. The GDW1000 fixed it completely. Calls are clear and 4G is fast enough for streaming."

David L., 4 stars, 2025-07-20: "Good booster for the price. Works well with EE and BT. Needed the 20m cable upgrade for our two-storey house. Otherwise excellent."

Emma R., 5 stars, 2025-08-05: "ASDA Mobile user here. The GDW1000 boosted both calls and 4G perfectly. Small office of 8 people all have signal now. Worth every penny."

Michael T., 5 stars, 2025-08-18: "Best £1090.61 I've spent. Mobile signal was terrible in our new build. The GDW1000 gives us 4-5 bars in every room. Installation was straightforward."

Lisa P., 4 stars, 2025-08-25: "Works as advertised. Boosts EE 4G well. The indoor antenna could be more powerful but for 1000m2 it's fine. Good value."

Robert H., 5 stars, 2025-09-01: "Rural Wales, EE was unusable indoors. GDW1000 with the outdoor antenna on the chimney gave us 3 bars throughout. 365-day return policy made it risk-free."

Claire W., 5 stars, 2025-09-10: "BT Mobile customer. The GDW1000 works perfectly. Both calls and 4G data are now reliable in our 3-bed semi. Highly recommend for EE network users."

Andrew G., 4 stars, 2025-09-15: "Solid booster. Need to make sure the outdoor antenna is properly aligned. Once aligned, performance is excellent. 4G speeds went from 2Mbps to 22Mbps."

Nicola B., 5 stars, 2025-09-20: "Bought for my parents' house. They had no EE signal for years. The GDW1000 changed everything. They can now make calls from the living room. Great product and support."

Across the ten reviews the consistent themes are zero-bar-to-four-bar EE recovery, straightforward 30 to 45 minute installs, reliable calls plus 4G, and the 365-day return window removing risk. The three four-star notes ask for a stronger indoor antenna or the paid 20 m cable on two-storey builds, which matches the optional upgrades rather than a hardware fault.

The TCO table flips the sticker argument. The GD1000 and GW1000 look cheapest on day one at £605.16, but a buyer who later adds the missing dual-band sibling spends £1210.32 for two boxes, two Yagi antennas and two cable runs, which is more than the single GDW1000 at £1090.61. The GDW500 stays cheapest for a genuinely 500 m² site because it needs no second unit, but it cannot grow to 1000 m² or 100 users. The GDW1000 wins the mixed-network all-band scenario outright on both day one and five-year cost.

The base GDW1000 at £1090.61 includes the main amplifier, the 8 dBi weatherproof Yagi directional outdoor antenna, the 5 dBi panel or whip indoor antenna, the 10 m outdoor plus 5 m indoor low-loss coaxial cable with N-type connectors, and the AC 100 to 240 V 50/60 Hz to DC 5 V UK 3-pin adapter. The unit weighs 3.0 kg, operates from -10°C to +55°C, and exposes BS for the outdoor donor port and MS for the indoor service port.

The optional 20 m cable upgrade adds £10 and is justified when the Yagi sits on a chimney stack 15 m or more from the comms shelf. The 30 m, 40 m and 50 m upgrades add £30, £40 and £50 for rooftop or warehouse gable mounts. The optional high-gain aerial adds £30 and helps rural sites where the outdoor reading is one bar or less. The optional surge protector adds £10 and protects against lightning-induced surges on exposed masts. All three combined take the total to £1210.61. Every additional 10 m of cable costs roughly 2 dB of signal loss, so keep the run as short as the building geometry allows.

The DIY install takes 30 to 60 minutes. Mount the Yagi on a chimney, fascia or external wall with clear line of sight to the serving mast, connect the 10 m outdoor cable to the BS port, route the 5 m indoor cable to the MS port, fix the 5 dBi panel on a central hallway or comms-room wall, keep the two antennas at least 10 m vertically separated, and plug in the UK adapter. Automatic gain control trims oscillation; the LED status shows steady green when the link is clean.

The GDW1000 is UKCA and CE certified and Ofcom licence-exempt, so no annual fee or frequency application is required. Units without UKCA and CE marks, or tuned to US bands, can attract Ofcom enforcement and adjacent-channel interference. Free UK delivery takes 1 to 2 days handling plus 10 to 15 days standard transit, and the 365-day mail return window with refund minus return shipping keeps purchase risk low for both home and business buyers.